Submersible Well Pump

Cast iron shallow well jet pump, For wells below 25 feet

Cast iron shallow well jet pump, For wells below 25 feet
Cast iron shallow well jet pump, For wells below 25 feet
Cast iron shallow well jet pump, For wells below 25 feet
Cast iron shallow well jet pump, For wells below 25 feet
Cast iron shallow well jet pump, For wells below 25 feet

Cast iron shallow well jet pump, For wells below 25 feet   Cast iron shallow well jet pump, For wells below 25 feet
GREAT PERFORMANCE - 1/2 hp, max. AUTOMATIC OPERATION - Pressure switch is pre-set at 30-50 psi for automatic operation.

DUAL VOLTAGE - 115V/230V motor, factory set for 230V with the quick change voltage selection switch inside motor cover box. DURABLE - Rugged cast iron pump body for durability and dedicated priming port for volute filling. RainBro pump is a Company designs, develops, and sells premium residential pumps. RainBro aims to provide the best-value and Easy-to-install pumps for your home needs.

Here at RainBro, you can find a full range of high quality pumps for all residential applications. RainBro offers well, Sump/Effluent, sewage and Lawn/Irrigation pumps and accessories.

Quality you can trust for years to come. The RainBro shallow well jet pumps are designed for use where the suction lift is 25 feet or less. It can be used with drilled dug wells, driven wells or with cisterns or lakes. When used for house water supply, the pump systems are accompanied by a pressure tank which provides constant water pressure to your home. This well pump is designed with a 115/230-volt motor, factory set for 230V with a quick-change voltage switch. A shallow well pump or a jet pump is usually fixed on the surface and placed inside a protected area outside a well.

This cast iron shallow well water pump is designed for wells up to 25 ft. At 40 psi it pumps up to 390 US gph at 5 ft.

This heavy-duty well pump is designed with a 115/230-volt motor, factory set for 230V with a quick-change voltage switch. If the power source is 115V, remove the electrical housing cover.

Flip the switch to 115V, replace the cover. NOTE: All electrical work should be performed by a licensed electrician. Slowly fill pump cavity until water comes out of air relief hole on the top of pump. It may take several minutes or more to fill the pipes and the pump completely. Watch the water level in the discharge tee.

Make sure the water level is stable and there are no air bubbles. Freezing:The pump and all piping must be protected from freezing. If freezing weather is forecast, drain pump or remove completely from the system. The RainBro CSW050 1/2 horsepower cast iron shallow well water pump is designed for wells up to 25 ft. At 40 psi it pumps up to 390 US gph at 5 ft..

Jet Pumps are mounted above ground and lift the water out of the ground through a suction pipe. RainBro well pumps are used for supplying fresh water to large homes, farms, and cabins. What's in the Box.

1/2HP shallow well jet pump. Do not run the pump before priming it, Remove the priming port and pour clean water into the unit until casing and suction line are completely filled. This jet Pumps are NOT submersible and are usually placed inside a protected area outside a well.

This item is in the category "Home & Garden\Home Improvement\Plumbing & Fixtures\Pumps & Water Filtration Systems\Pumps". The seller is "lasbargains" and is located in this country: US. This item can be shipped to United States.

  • Maximum Working Pressure: 50 psi
  • Power Source: Ac
  • Color: Black
  • Custom Bundle: No
  • Maximum Flow Rate: 6.5 Gallons Per Minute
  • Material: Cast Iron
  • Brand: Unbranded
  • Type: Water Pump
  • Horse Power: 1/2 HP
  • Manufacturer Warranty: 2 Years
  • Item Dimensions LxWxH: 13.6 x 8.4 x 7 inches
  • Features: Noise Vibration Reduction, Submersible
  • Item Weight: 21.7 Pounds
  • Maximum Head Lift: 25 feet


Cast iron shallow well jet pump, For wells below 25 feet   Cast iron shallow well jet pump, For wells below 25 feet